| |
|
Hardware & Performance
|
- H.264 Hardware
Compression
- Pentaplex -
Live/Playback/Record/Backup/Remote Access
- Embedded Linux RTOS
for reliability
- High Performance
Embedded Microprocessor and Texas Instruments DSPs
for performance
- Real-Time Record
at 4CIF
- Sync'd Audio on
all channels
- VOIP
- 2 USB 2.0 Ports
- 1 for mouse, 1 for USB HDD, CDRW, DVDRW, flash drive
backup
- Internal DVD-RW
writer
- 6 SATA Hard
Drives Bays, even with DVD-RW installed
- VGA
MonitorOutput
- DUAL Spot
Monitor Output
- DUAL 10/100
Network Interface
|
|
Ease of Use
|
- Jog/Shuttle
Control - For fast forward/rewind and frame-by-frame
playback
- Graphical User
Interface with on-screen menu tips
- Front Panel, USB
Mouse, PC Keyboard, and IR Remote Control
- USB Mouse - Simple
point and click setup and use
- Simple Setup -
Configure all channels with one setting
- System Defaults -
Power it on and it starts recording 24/7, motion detect
areas default to entire screen.
- Hard Drives are
plug 'n play and do not require formatting, saving time and
configuration
- RS-485 and Alarm
connections are screw terminals for quick setup
|
|
Versatility |
- Independent Channel
Configuration
- 2 Channel
Independent Simultaneous Playback
- Simultaneous
Recording Methods
- Advanced User
Management
- Variable Bit Rate
or Constant Bit Rate settings per channel
- Ease Backup Methods
- USB devices, CD-RW/DVD-RW, network backup
|
|
Functions |
- RAID 1 - You can
set specific hard drives as redundant. System will
record to the primary hard drives and the redundant drives
simultaneously for data integrity. Protects recordings from
hard drive failures
- Hard Drive
Hibernation Technology - Drives will power down when not in
use, conserving energy and increasing the life span of the
drives
- HDD Status and
Problem Alerts via email
- Power Failure
Auto-Recovery - If there is a power loss, system will
automatically boot and start recording once power resumes.
- Scheduled
Auto-Restart and Auto-File Deletion
- Digital Zoom
- Privacy Masking -
both on record and/or live
- Motion Detection
- View Tampering
Alerts
- Video Loss Alerts
- Configurable Live
Channel Sequencing
- Multi-Protocol PTZ
support via RS-485
- Fluent PTZ control
- PTZ pattern, tour,
and preset setup
- 3-D Intelligent PTZ
Control - control PTZ by simply dragging your mouse to the
location you want to see and zoom using the scroller
- PTZ Triggering on
motion detection or alarms
- System Info - Hard
drive status and recording times on each drive, bitrates per
channel currently in process, online users, etc.
|
|
Networking |
- VOIP - two way
voice chat between PC and DVR
- Complete remote
access including live view, playback, configuration,
upgrade, reboot, system status, and backup via Internet
Explorer
- Central
Monitoring Software with up to 36 camera display
- 4 Channel
Simultaneous Playback
- Email alerts for
all system alerts, motion detection, alarm triggering,
etc.
- Dual-Stream
network configuration - Separates network quality and
FPS settings from DVR recording settings. Allows you to use
high resolution recording to the hard drive and lower
resolution and frame rates for fluent network transmission.
- Low bandwidth
remote viewing supported
- PPPoE - for DSL
direct connection
- DDNS via
dyndns.org or no-ip.com (free DDNS providers)
- DHCP for
automatic network configuration
- FTP for off-site
redundant recordings. Upon motion detection, alerts, or
schedule unit can simultaneously record to an off-site
location to an FTP server. Prevents data loss in the case of
DVR theft, destruction, or hard drive failures by
automatically sending recordings off site via the Internet.
- 10 users
simultaneous network viewing. Up to 10 users can
simultaneously view all channels of the DVR via the network
or remote locations.
- IP Address
Filtering and Connection Blocking
- IP Connection Log
- NTP - Network Time
Protocol, allows the DVR to automatically sync with correct
time/date
|
|
